UNIQUE MECHANISM-MERITS
1. No electricity needed-economical, environmentally friendly
2. Super-powerful permanent magnet conducts stronger holding power than electro-magnet
or electro-permanent-magnet
3. Detachable switch lever-easy manual on-off operation
4. Partial area can be turned on or off selectively when necessary
INSTALLATION & OPERATION
1. Neither electric power nor electric control needed-easy and simple installation
2. Structural alteration possible by reassembling modules
3. No wear and tear of magnetism or work-holding device-No expense for maintenance or repair
4. Speedy delivery by assembling ready-made modules
■ Outline drawing-Principal parts/Accesorries
■ Model Notation-Model Selection
| Model |
Dimension(mm) |
Block Size
52x52mm |
Wgt (kg) |
| MBM35 |
125 X 304 X 100 |
8 |
23 |
| MBM40 |
125 X 366 X 100 |
10 |
28 |
| MBM45 |
125 X 429 X 100 |
12 |
33 |
| MBM50 |
125 X 491 X 100 |
14 |
38 |
| MBM55 |
125 X 554 X 100 |
16 |
43 |
※ When only modules are purchased, no accessorial kits are provided.
When foundation plate, detachable switch lever, and bed fixing devices are provided,10% surcharge is
added.
|
| Completely assembled device |
| Model |
Dimension(mm) |
Block Size
52x52mm |
Wgt (kg) |
| 3MB4035 |
375 X 304 X 115 |
24 |
86 |
| 5MB6540 |
625 X 366 X 115 |
50 |
172 |
| 7MB9045 |
840 X 429 X 115 |
84 |
280 |
| 9MB11050 |
1125 X 491 X 115 |
126 |
411 |
| 10MB13055 |
1250 X 554 X 115 |
160 |
520 |
※ When assembled MAGBED is purchased, accessory set comes at no charge.
■ Cutting capability by the thickness of work-piece
+ Material: SS400/ SKD11
+ Dimension : 150 X 150mm
+ RPM : 420
+ Feeding speed : 280mm/min
+ Diameter of face cutter : Ø250mm
|
|
|  |
| work-piece thickness (THK) |
8mm |
10mm |
15mm |
20mm |
25mm |
30mm |
| SS400 |
cutting depth (mm)
| 2 |
3 |
4 |
4.5 |
5.5 |
6 |
| SkD11 |
cutting depth (mm)
| 0.7 |
1 |
1.5 |
1.5 |
2 |
2 |
* Above testing result is based upon actual Kaesung ’s testing conditions.
These results can vary according to the location of work-piece and working condition.
■ Cutting capability by work-piece size material
+ Material: SS400
+ Thickness : 25mm
+ RPM : 420
+ Feeding speed : 280mm/min
+ Diameter of face cutter : Ø250mm
|
|
|  |
| work-piece size (A X B) |
50 X 70
| 50 X 100
| 75 X 100
| 75 X 150
| 150 X 150
| 200 X 200 |
| cutting depth (mm) |
1.5 |
2.5 |
4 |
4.5 |
5.5 |
7 |
* Above testing result is based upon actual Kaesung ’s testing conditions.
These results can vary according to the location of work-piece and working condition.
MAGBED Installation video
